EN
Vision - best wood im besten Sinne

best wood in the best sense

The future is built on wood So best wood remains the best building material

Wood is the most sustainable building material - and will remain so if it continues to be processed regionally and in a way that conserves resources. This is exactly where we come in: The timber from best wood SCHNEIDER always goes through a complete value chain. This means: we rely on regional wood, short transport routes and innovative production processes - and all of this in a closed operational cycle that really uses everything from the tree. From raw material cut from roundwood to the last chip pressed as a pellet, everything is utilised.

Our wood products: certified sustainable and energy-efficient

We place the highest value on an energy-efficient manufacturing process in the production and processing of all our products. To this end, we have certified our company according to DIN EN ISO 50001 and thus officially committed ourselves to society and the environment. The particularly good values we achieve in the Environmental Product Declaration (EPD) and in the tests for the natureplus® seal prove our especially sustainable manufacturing process and the ecological quality of our wood and wood fibre products.

Vision Pflanzen
1
1
The best wood SCHNEIDER material cycle

Regional raw materials

Because we love our homeland, we place the highest value on environmentally friendly production on site. For this reason, the majority of our products are made from regional spruce from PEFC-certified, domestic forests. For special visible qualities, Scandinavian woods are used at the customer's request. Our own fleet of lorries can transport roundwood back when final products are delivered. This allows us to use wood from the regions where our products are also installed and saves us long transport routes.

2
2

Sustainable sawmill

Even in the past, sawmills were operated with sustainable energies, for example hydropower. We are continuing this tradition. Thus, our sawmill forms the first "cut" in an ecological production cycle that is particularly resource-saving and value-adding:

We feed the residual wood and bark from sawing into the biomass cogeneration plant to generate energy for our production. Only wood that can no longer be processed is used here. Wood chips are used in the production of wood fibres and pellets are made from wood shavings and sawdust.

3
3

Structural timber and ceiling production

The sawn timber from the sawmill is now processed into various glulam, CLT and KVH lines of sustainable timber products for structural and modern timber construction. Wood shavings and sawdust are used for the production of pellets. Residual wood is fed directly into the company's own biomass cogeneration plant.

4
4

Production of wood fibre insulation boards

The wood chips from the wood processing go directly into the wood fibre insulation board production. This takes place in one of the most modern production facilities for flexible and pressure-resistant wood fibre insulation materials. Here, wood chips are processed into best wood SCHNEIDER® wood fibre insulation boards in an energy-saving dry process in a continuous production line.

5
5

Regional pellets

We process the wood shavings on site into ENplus A1 certified spruce pellets. These are ahead of fossil fuels in terms of their eco-balance and the energy required for their production is covered by our own biomass power plant. In short: sustainable, practical, good.

6
6

Own logistics

For the best possible delivery times, we deliver our timber, our wood fibre insulation materials and our wood pellets with our own trucks. With our in-house route planner, we can plan each tour efficiently and in an environmentally friendly manner - and also transport logs back to our plant with specific trucks in the same stuff after delivering our products to the construction site. Here, too, we make a contribution to CO² reduction.

7
7

Biomass power plant

Our biomass cogeneration plant is fired with bark and residual wood that can no longer be recycled and thus generates environmentally friendly energy - as much as is needed at the site. The resulting process heat is primarily used for drying the wood fibres for our insulation materials, for hall heating and drying sawn timber, as well as in pellet production.

Nomination clip "Umweltpreis Baden-Württemberg" 2020

Good for nature, good for everybody. Tested, certified.

Products with a natureplus label consist predominantly of renewable raw materials or raw materials that have been obtained in a nature-friendly way. Demanding independent tests and Europe-wide strictest limit values for indoor air quality guarantee the ecological quality of the certified products.

www.natureplus.org

PEFC is a transparent and independent system for ensuring sustainable forest management and thus a global "forest MOT". Forest certification according to PEFC standards is based on very strict guidelines for the sustainable management of forests. This management is controlled by competent and independent organisations.

www.pefc.de

An EPD (Environmental Product Declaration) presents the life cycle of a building product as well as information relevant to building physics and in general. The Environmental Product Declaration is drawn up in accordance with the DIN EN 15804 standard and thus ensures a uniform assessment and comparability of EPDs.

www.ibu-epd.com

With the CE marking, we as the manufacturer confirm that our best wood wood fibre insulation materials comply with the product-specific applicable European directives of the European Union.

www.ce-zeichen.de

The mark of conformity (Ü mark) identifies construction products that comply with the relevant technical rules, the building authority approval, the building authority test certificate or the approval in individual cases.

www.landesrecht-bw.de

The KEYMARK is the European certification mark that documents the compliance of products with European standards.

www.keymark.eu

Material guarantee deposited with the Central Association of the German Roofing Trade. Only the professional processing of flawless materials guarantees true customer satisfaction. This is why the ZVDH has developed the material guarantees together with renowned partners in the roofing industry. We offer the guild companies protection in the event of material complaints, in that we, as the manufacturer, have deposited a comprehensive guarantee for our products.

www.dachdecker.org

ENplus-certified pellets are produced according to strictly defined properties that exceed the applicable standard. ENplus monitors the entire supply chain from production to trade to delivery to the customer in order to ensure high fuel quality all the way to the storage room.

www.enplus-pellets.de

Our locations

In the heart of nature, for nature

Eberhardzell, Märstetten, Messkirch: This is the home of sustainable wood building materials – because it's best wood SCHNEIDER's home.

Loading